FRYER CODE: 391079

Deep drawn V-Shaped well.
High efficiency 20 kW burners in stainless steel with flame failure device attached to the outside of the well.
Thermostatic regulation of oil temperature up to a maximum of 190 °C.
Flame failure device on each burner.
Overheat protection thermostat as standard on all units.
Oil drains through a tap into a drainage container positioned under the well.
All major compartments located in front of unit for ease of maintenance.
Piezo spark ignition for added safety.
IPX5 water resistance certification.
The special design of the control knob system guarantees against water infiltration.
Unit delivered with four 50 mm legs in stainless steel as standard (all round Stainless steel kick plates as option).
Supplied as standard with 2 half size baskets and 1 right side door for cupboard.
Interior of well with rounded corners for ease of cleaning.
Unit is 930 mm deep to give a larger working surface area.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.

Gas Power: 68180 Btu/hr (20 kW). Gas Type Option: LPG or Natural Gas. Gas Inlet: 1/2″ Natural gas – Pressure: 7″ w.c. (17.4 mbar) LPG Gas Pressure: 11″ w.c. (27.7 mbar) Key Information: Usable well dimensions (width): 340 mm. Usable well dimensions (height): 575 mm. Usable well dimensions (depth): 400 mm. Well capacity: 21 lt MIN; 23 lt MAX Thermostat Range: 120 °C MIN; 190 °C MAX. Net weight: 57 kg. Shipping weight: 75 kg. Shipping height: 1080 mm Shipping width: 460 mm Shipping depth: 1020 mm. Shipping volume: 0.51 m³